El Tigre
I'm Awesome
I use AN-10 fitting/hose so adding things into a particular circuit is made far easier
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I cut the supply heater hose, and I stalled a Preston flush kit. It's a "T" that fits in the heater hose. It allows you to back flush the cooling system with a garden water hose, by removing the radiator cap. The end of the garden hose to the "T". The yellow hard plastic pipe, fits into the radiator, where the radiator cap fits, once you remove it. If been using them for years. They work grate. Once your done with the flush. There is a hard plastic cap that screws onto the end of the "T".What's the best way to do a block flush if the T-stat is still in place? Remove heater hose from manifold?