Brakes trouble need help!!

[Mike99tahoe]

Problem started after my driver wheel cyclinder went out replaced it and bleed the brakes not I have to press the brake pedal 2 times just to get it to stop I replaced the master cylinder bleed to and did all 4 sides 3 to 4 times of bleeding still pedal goes to the floor and I have no leaked what could it ne please let me know and its a 99 tahoe with abs thanks

 

[evilunclegrimace]

You may have air in the ABS module. Google ABS bleeding procedure.

 

[PlayingWithTBI]

You may have air in the ABS module. Google ABS bleeding procedure.

agreed, you should bleed your brakes with a vacuum pump system or you'll get air pockets in the ABS module.

 

[sterling454]

Do what is on the attached video link. It worked for me.

xc_hide_links_from_guests_guests_error_hide_media

 

[Mike99tahoe]

I did that still pedal to the floor

 

[evilunclegrimace]

Make sure that you rear brakes are adjusted correctly. If you have followed the bleeding procedure for the ABS module in the video AND bled the system and still have no pedal I would suggest that you have a shop use a scanner to auto bleed the ABS module.

 

[Mike99tahoe]

Did that found out its the abs module

 

[evilunclegrimace]

Did that found out its the abs module

Well that's a drag. Time to hit the Recycling yard.