Bench to 60/40 swap?'s

jmig

Can't leave it stock
Joined
Jun 15, 2010
Messages
817
Reaction score
155
Is there a seat track that I can just swap to make this work or do I have to modify what I got? 60 portion is sitting on the trans tunnel and its up pretty high.
 

95Suburban

OBS Enthusiast
Joined
Jan 2, 2014
Messages
65
Reaction score
4
Location
Sandwich Il
I'm assuming you have the tracks for the 60/40. When I swapped from buckets to the 60/40 everything lines up. Had to drill two holes over the tunnel was all, and the dimples were already there.

Sent from my 831C using Tapatalk
 

jmig

Can't leave it stock
Joined
Jun 15, 2010
Messages
817
Reaction score
155
I'm assuming you have the tracks for the 60/40. When I swapped from buckets to the 60/40 everything lines up. Had to drill two holes over the tunnel was all, and the dimples were already there.

Sent from my 831C using Tapatalk

Yes I do have the seat tracks, the 60/40 also came out of an 92 ext. cab. The inbound side of the 60 is on the trans tunnel so it doesn't sit flat as it should. I just need to know if there are seat tracks for a 60/40 for standard cabs.
 

badazzbulldog

I'm Awesome
Joined
Oct 13, 2010
Messages
2,978
Reaction score
73
Location
medway,ma
no there aren't for a reg cab that i know of I modified that part of the track when i did 60/40' in my 97.cut it down to fit height wise and welded the foot part back on for the bolt to go in
 

jmig

Can't leave it stock
Joined
Jun 15, 2010
Messages
817
Reaction score
155
Here's a pic of the bracket that needs to be cut, hoping the front one is good to go.
You must be registered for see images attach
 

jmig

Can't leave it stock
Joined
Jun 15, 2010
Messages
817
Reaction score
155
Cut the rear bracket off
You must be registered for see images attach
 

4player

Wookie Wagon
Joined
Apr 5, 2013
Messages
144
Reaction score
26
Location
Yakima WA
I built my own when I took out my buckets.
You must be registered for see images attach
 
Top