International47
Newbie
Ok nothing fancy here. Just looking for some info/ guidance.
stock 350 block (638)- non roller. new bearings, gaskets, timing chain, oil pump.
new Summet 1102 cam, new gm performance lifters, springs are 100 seat 290 open .490 lift, oil shields and rotators removed, full roller rockers
newly ported and cleaned up 193 heads, vortec single groove valves.
Edelbrock 3704 intake- casting edges...etc cleaned up. stock throttle body, normal grinding mods, pod spacer, 15lb spring.
S10 shorty headers, 2.5' duel exhaust,H-pipe under the tailshaft of trans. heated o2. no cats.
I have EBL flash on its way.
I was wondering what bin file would be sufficient for start up and break in of cam?
Or should i not install EBL flash and do the break in on the stock computer?
Secondly- later on, would an adjustable fuel pressure regulator be more appropriate for tuning, or would the 15lb spring be fine?
Pics are just for fun, as i rarely see any ported tbi heads.
Any opinions on how it will run/ power amounts? 4l60E, 3.42 gears, 3200lbs truck.
stock 350 block (638)- non roller. new bearings, gaskets, timing chain, oil pump.
new Summet 1102 cam, new gm performance lifters, springs are 100 seat 290 open .490 lift, oil shields and rotators removed, full roller rockers
newly ported and cleaned up 193 heads, vortec single groove valves.
Edelbrock 3704 intake- casting edges...etc cleaned up. stock throttle body, normal grinding mods, pod spacer, 15lb spring.
S10 shorty headers, 2.5' duel exhaust,H-pipe under the tailshaft of trans. heated o2. no cats.
I have EBL flash on its way.
I was wondering what bin file would be sufficient for start up and break in of cam?
Or should i not install EBL flash and do the break in on the stock computer?
Secondly- later on, would an adjustable fuel pressure regulator be more appropriate for tuning, or would the 15lb spring be fine?
Pics are just for fun, as i rarely see any ported tbi heads.
Any opinions on how it will run/ power amounts? 4l60E, 3.42 gears, 3200lbs truck.
Attachments
Last edited: