Smith
I'm Awesome
- Joined
- Dec 5, 2009
- Messages
- 132
- Reaction score
- 12
Been a long time coming. Truck used to be sitting on 38.5 Claws with a 6 inch Pro Comp and a 3" Body lift.
Truck Specs will be
97 K2500 7.4l Vortec. Volant Intake, Upgraded Injectors and a Tune.
4l80E with a Transgo HD2 Shift Kit
Dana 60 Front with 5.38 Gears and ARB Locker. PSC Hydro Assist, 35 Spline Yukon Chromoly Outers. MileMarker Hubs. MIGHT be upgrading to Yukon Chromoly Inners
14BFF rear with 5.38's, Detroit Locker. Disc Brake Conversion
Dual Transfer Cases with a NP205 Divorce Mount case Behind the Factory Tcase.
Poly Body Bushings Installed and Body lift Removed
Custom 4 Link Setup with Ballistic Joints and Ballistic Poly Joints. Truck will sit at Roughly 14 Inches of Lift. Plan to eventually run some sort of a 40/20 Tire and Rim combo but will likely be on my 38's for a little While
This is all being done at My friends Jason Katterheinrichs shop. The shop is Kat Kustoms. He has done all the figuring and tinkering with the 4 Link while ive basicly been the shop Monkey. Ive had my input and Ideas on how to do a few things but this has all been his Brainchild. I could do a simple spring SFA conversion with bolt together parts but I could never do the Fab work that is involved in this 4 Link. Check out his Facebook https://www.facebook.com/katkustoms?fref=ts
This axle brackets, Link Mounts etc MAY eventually in the FUTURE become a purchasable kit. Not 100% certain on that. My truck will be the guinea pig and as always there is some tweaks and revisions that will be done before this could ever become a possibility
Truck Specs will be
97 K2500 7.4l Vortec. Volant Intake, Upgraded Injectors and a Tune.
4l80E with a Transgo HD2 Shift Kit
Dana 60 Front with 5.38 Gears and ARB Locker. PSC Hydro Assist, 35 Spline Yukon Chromoly Outers. MileMarker Hubs. MIGHT be upgrading to Yukon Chromoly Inners
14BFF rear with 5.38's, Detroit Locker. Disc Brake Conversion
Dual Transfer Cases with a NP205 Divorce Mount case Behind the Factory Tcase.
Poly Body Bushings Installed and Body lift Removed
Custom 4 Link Setup with Ballistic Joints and Ballistic Poly Joints. Truck will sit at Roughly 14 Inches of Lift. Plan to eventually run some sort of a 40/20 Tire and Rim combo but will likely be on my 38's for a little While
This is all being done at My friends Jason Katterheinrichs shop. The shop is Kat Kustoms. He has done all the figuring and tinkering with the 4 Link while ive basicly been the shop Monkey. Ive had my input and Ideas on how to do a few things but this has all been his Brainchild. I could do a simple spring SFA conversion with bolt together parts but I could never do the Fab work that is involved in this 4 Link. Check out his Facebook https://www.facebook.com/katkustoms?fref=ts
This axle brackets, Link Mounts etc MAY eventually in the FUTURE become a purchasable kit. Not 100% certain on that. My truck will be the guinea pig and as always there is some tweaks and revisions that will be done before this could ever become a possibility
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach