93 Extended cab step side (project)

[bigboy]

Well here are some pics of my newly acquired project.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

One of the previous owners decided to rip the back of the cab out.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

And now the pics from what I got done this weekend and parts I picked up at the junk yard.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Here is a pic of the bundle of wires I pulled from under the dash.

You must be registered for see images attach

You must be registered for see images attach

I have some new stuff on the way

You must be registered for see images attach

You must be registered for see images attach

 

[bigboy]

Well yesterday I ordered a billet insert for my grill. And I just ordered a tailgate handle relocator for when I shave the gate. The truck is going to the tranny shop Thursday or Friday, it shifts hard as hell and is holding first gear way to long.

 

[bigboy]

I got my lights in yesterday and according to the UPS website I should be getting most of the parts I ordered today. We will see since it snowed here last night. Here is a pic of the relocator kit I ordered.

You must be registered for see images attach

 

[bigboy]

When I went to drive the truck to the trans shop the other day I noticed that thee steering was all loose, so we turned around. I looked into the front end to see what all parts I needed and here is the list: Pitman arm, Idler arm bracket, Idler arm both, upper ball joints, passenger side upper a arm bushings. I got it all put on the other day and now it won't start.

 

[bigboy]

Figured out why it wouldn't start. Before I finally figured out the problem I replaced the plugs, wires, cap, rotor and ignition coil. Tried to crank it and nothing still. So I poured some gas in the TBI and it started instantly. I let the truck run for about 30 minutes after it started and noticed the radiator has a leak. So I went to the parts house and picked up a fuel pump/sending unit and a radiator. This weekend I will be putting the fuel pump in.