Correct---the beveled edge of each washer faces inward towards the frame/upper mounting surface.So the flat part of the washers is out towards the nut and head of the bolt?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Correct---the beveled edge of each washer faces inward towards the frame/upper mounting surface.So the flat part of the washers is out towards the nut and head of the bolt?
I don't think that they are s.s., I think they are zinc plated. I will check for you though.I like the power steering hoses. They appear to be stainless steel. Is that correct? If so, I should have purchased those to match my stainless steel brake and fuel lines. I'm gonna' have to start consulting you before ordering more parts for my truck.
Are those just anti-tramp rods in the back or a whole different suspension setup?So I’m going to interrupt the regularly scheduled program to show you guys and girls my last 400. I bought it in 96 when it was about 1.5 years old and bone stock. It went through three different iterations before I sold it to a friend in 17. It was tough to let it go, but I had just bought a 16 Duramax and it was twice the truck (sorry). I’m going to show you the final version and before anyone gives me any grief, if I it to do over it would have different side mirrors.
Well here we go.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
They are just traction bars. When I finished the final build the guys at Bilstein helped me get the proper shocks on it so it lost the two in the back on the bars and just had them in the stock locations. Up front I had three shocks and ended up removing the ones in the stock location and going with duals up front. It rode so much better after they helped get properly valved shocks where they were supposed to be.Are those just anti-tramp rods in the back or a whole different suspension setup?