89 - 94 door panel pictures

[lester622]

Looking for pictures of 89-94 style door panels that have been recovered or redone. If anybody has any

 

[4x4incountryboy]

subbing for this!

 

[twomanymontes]

I'd be interested as well. Mine are just plain plastic

 

[FastOrange]

88-89 and 90-94 are different.

And W/T and silverado/SLE got different panels.

 

[MSCustoms]

I redid both door panels and front bucket over summer with the same colors. I put fiberglass on the backside of the panel to give the weak cardboard some strength and also put fiberglass on the front where the carpet material goes.

You must be registered for see images attach

You must be registered for see images attach

 

[lester622]

I redid both door panels and front bucket over summer with the same colors.

How much of a headache are they to redo? They look pretty flat with not a lot of curve, so they shouldn't be to bad but ive been wrong before.

 

[MSCustoms]

How much of a headache are they to redo? They look pretty flat with not a lot of curve, so they shouldn't be to bad but ive been wrong before.

They are not bad but the only "hard" part is tucking the material under the plastic edges. Just make sure you have the right amount of extra material to tuck under. Also, the stripe material will not lay flat if you fold it, you can see it on the driver side on the fourth vertical line. You can avoid this by keeping it flat and folding the solid blue material when sewing.

 

[BHBurban]

You must be registered for see images attach

Tops redone to match my seats

You must be registered for see images attach

 

[eric.s.t]

Is the speaker a custom made addition? Or did you buy that somewhere?

 

[BHBurban]

Is the speaker a custom made addition? Or did you buy that somewhere?

I made them some years ago for components. When I bought the truck back, it had those Kenwoods in them.