Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
You will need 2 additional relays. 1 relay will be low beams, 1 will be highs, and the last will be the high 4. You will have to splice for the high 4 unless you get a premade harness
I went the fun route. I used a relay to power HID lows, then threw in a diode from the high beams to kick on the low beam relay coil without backfeeding the relay coil circuit to the high beam power circuit.