33 inch tires with 3 inch lift kit

[bluex]

Personally i would do a 4 inch suspension lift with 33's to avoid any type of rubbing

It will ride so much better with that setup over a crank an block too....

 

[BOTTLEDZ28]

Are the tapered lift blocks measured at the short side or tall side? I have 2" lift blocks on my tahoe that are not tapered and would like to go with a tapered pair but do not want the rear to drop if the tapered ones are slightly shorter

 

[96-1500]

Don't do anything until you get your tires. I've seen 285/75/16s fit with no rubbing on bone stock trucks, whilst others rub a bit.

 

[TylerZ281500]

Zone off-road has them cheap. Look for the tapered blocks. They fight axle wrap.

incorrect, with lift blocks youll always have axle wrap unless you go to a ladder bar setup or something to tie down the axle. tapered blocks just lift your pinion so your front slip yoke is still in the trans and not so far out that it starts whipping.

 

[ShadowRejects]

im gonna put 35's on with a 2in block and crank

this guy.

You must be registered for see images attach

 

[98chevyz71]

You must be registered for see images attach

now I wish I wouldn't have found an awesome deal on 33's

 

[ShadowRejects]

now I wish I wouldn't have found an awesome deal on 33's

the 33s look SICK on your truck

 

[98chevyz71]

the 33s look SICK on your truck

Thanks Tristan! and 35's with 3.73's probably wouldn't be a good combo

 

[ShadowRejects]

Thanks Tristan! and 35's with 3.73's probably wouldn't be a good combo

Im runnning 35's and 3.42's

 

[98chevyz71]

Im runnning 35's and 3.42's

how does it move?