1999 C3500 CC DRW Build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bluex

Mall Crawlin' ****!!!
Supporting Member
Joined
Jul 15, 2011
Messages
27,200
Reaction score
1,769
Location
Spartanburg, SC
I'm going to like this I think....

You must be registered for see images attach

You must be registered for see images attach

AC charged up an working good. Gotta finish up these seats an I can take it for a drive, probably wait till tomorrow when it's not raining...
 

bluex

Mall Crawlin' ****!!!
Supporting Member
Joined
Jul 15, 2011
Messages
27,200
Reaction score
1,769
Location
Spartanburg, SC
Mine adjusted themselves? Not sure why you're having adjustment issues. I ran mine out until they kissed and it still sucked. Backed up a bunch and it was a little better. Took it out for a camping trip and that did the tricky. It's a longer pedal than my 1500 with JB7 master/calipers and HB, but that's understandable as it has larger calipers and wheel cylinders.
My guess is they were just to far out to work properly? I set them up mostly how the manual said but I probably didn't run them out far enough to start with to center them an then back off. I haven't driven it yet but I did back up a bunch trying to get them to adjust last week. All that is new an lubricated so it should work very well I'd think.
 

fancyTBI

Some of my trucks run and drive
Supporting Member
Joined
Oct 7, 2018
Messages
2,741
Reaction score
7,528
Location
Northern IL
Those seats look great. I enjoyed my seats in my old LML. Are you going to add the wireless charging jump seat console cover?
 

Keeper

I'm Awesome
Joined
Dec 6, 2020
Messages
624
Reaction score
1,482
Location
Northern Virginia
Sooooo... excuse my ignorance. I just don't pay much attention to anything built this century. What seats/console are those? That's a proper sized console for a big truck.
 

BNielsen

I'm Awesome
Joined
Sep 6, 2018
Messages
2,685
Reaction score
4,246
Location
North Carolina
Sooooo... excuse my ignorance. I just don't pay much attention to anything built this century. What seats/console are those? That's a proper sized console for a big truck.
GMT900 seats and center; apparently it's possible to mount that flip up center console in a GMT400 with a 60/40 but it's tight.
I've explored it, halfway tempted to try
 
Top