1994 Z71 Rebuild

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Sampuppy1

Diesel nut
Joined
Mar 26, 2013
Messages
10,856
Reaction score
1,223
Location
West MI
That was my train of thought

sent from what is likely a government flagged smartphone. Tyler/T-Unit
 

lkfldredneck

HILLBILLY DELUXE!!!
Joined
Mar 27, 2013
Messages
8,928
Reaction score
74
Location
"The Boonies" Ontario Canada
Well i went to the bogs last night. Saw s bunch of sweet 400s goin through. My buddies big ass project truck was finished friday night and bogged it yesterday.

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images


And then there were these 400s

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images


And then there was mine that went through!

You must be registered for see images

You must be registered for see images


Craigslist be like "Never seen mud"
You must be registered for see images

You must be registered for see images
 

dylan94sierra

OBS Enthusiast
Joined
Jul 3, 2014
Messages
97
Reaction score
2
Location
Central Florida
Nice build man! Do your 33s rub with the T-bars cranked all the way? I have 33s cranked level and they rub like crazy... most likely gettin a 3in lift soon cause of it.
 

dylan94sierra

OBS Enthusiast
Joined
Jul 3, 2014
Messages
97
Reaction score
2
Location
Central Florida
My 33s are too small.. lol your bars are probably really worn out. Pull em out and swap sides then it will be reversed

Really? lol I have 305s but there also pretty wide, they stick out the side of the fender about 2 or 3 inches. Im not sure of the offset but the width of them could be the problem
 
Top