18” wheels for a 95 k2500

[Claytorr]

I have a 1995 k2500 6.5td. I would like to run 18” wheels as there are more tire options. I got a set of dodge 2500 18’s and the rear axle hub wouldn't fit (the wheel was 1/2” from the drum). I am wondering if other people have suggestions for what 18” rims will fit?
Picture of the front

You must be registered for see images attach

 

[Nad_Yvalhosert]

Bolt on a 2" lug-centric spacer and the Dodge wheel might fit. It's a full floater, huh?

 

[Claytorr]

Yes full floating and figured I would just get the right wheels and tires. I have never messed with spacers before (seems like one more thing to go wrong)

 

[OutlawDrifter]

As long as you run a quality spacer and make sure it is torqued properly, there is nothing to worry about.

My DD Tunda and former DD K2500 'burb both run spacers. 2" steel on the back axle of the 'burb and 1.25" aluminum on the Tundra.



Edit: However, running MOPAR parts on a GM vehicle is at least a 35hp reduction in power...