sarnold75
Newbie
As old77 put it in on my initial post will be the working name of this truck. New bushings installed. Ran into a couple surprises!!! Both passenger corners were pressed through. Luckily I did some reading and got some xxxl washers from local equipment company. Used a couple on frame brackets where oe bushing was pressed/rusted through. Corners massaged metal back down and sandwiched top and bottom. Should hold until I can get substantial bracing fabled in.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach