Jason Warrum
Newbie
ExactlyIt looks like the PCV connection. The brake booster connection comes from the front of manifold through a preformed steel line that transitions to a rubber line at the booster elbow.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
ExactlyIt looks like the PCV connection. The brake booster connection comes from the front of manifold through a preformed steel line that transitions to a rubber line at the booster elbow.
Took off air cleaner and looked. Same thing happened in my 94 c1500 I haven’t touched the booster yet. Gna swap this first. Will update tmorow after workFound that with the water trick or just by checking with eyes? Is that a feed for the brake booster or what?
Took off air cleaner and looked. Same thing happened in my 94 c1500 I haven’t touched the booster yet. Gna swap this firstFound that with the water trick or just by checking with eyes? Is that a feed for the brake booster or what?
pulls to the floor.A booster check. Before starting step on brake pedal and hold while cranking and start. What does brake pedal do?
1. Nothing. 2. Pulls lower to floor.
Pulls to the floor. But it doesn’t seem to idle as high for and not as long when I do that and start it. But I did pull the vacuum line off the booster and try to plug it with my thumb and that didn’t seem to change much.A booster check. Before starting step on brake pedal and hold while cranking and start. What does brake pedal do?
1. Nothing. 2. Pulls lower to floor.
Scanner may be useful. Have you tried seeing if there are any codes?
TPS reading right?