MalcolmEatmanGoode
Newbie
Howdy gents, has anyone use the Kryptonite Suspension parts for the control arms and tie rod ends? Pros and Cons if so?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
i posted pics of them installed in https://www.gmt400.com/threads/control-arms-for-lifted-trucks.65842/page-2#post-1390430 post #16 also made a video but haven't released it yetHowdy gents, has anyone use the Kryptonite Suspension parts for the control arms and tie rod ends? Pros and Cons if so?
can i get a pic of the sway bar link setup? i want to get those nexti just installed them, the tie rods are extremely easy to adjust, which is a nice plus. The control arms are nice, but they dont have any built in mounting other than the ball joint bolt for securing the abs wire, the grease zerks that come with the arms for the bushings are 90 degrees, i would get a straight one, the angle looks very hard to get a grease gun connected at that angle . Requires a zip tie if you have to much play or rubs on anything. I went with the whole package, center link, pitman arm, steering stabilizer, and sway bar links. Havent drive it yet as engine is pulled
can i get a pic of the sway bar link setup? i want to get those next