Drivers side door problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

90chevywly

Newbie
Joined
Jul 8, 2021
Messages
6
Reaction score
1
Location
California
Good evening Gmt400 humans I have noticed that my drivers side door pokes past my fender and then dips behind it towards the bottom. I've noticed that the passenger side pokes slightly in so I'm thinking it could be a cab issue possibly or tweaked frame but not sure. Hoping someone else would have some experience with this stuff. here are some pics of the driver side enjoy :)
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

ChrsLytn

OBS Enthusiast
Joined
Jan 10, 2013
Messages
91
Reaction score
74
Location
Douglasville,Ga.
I don’t think so I had my doors apart for paint so I don’t know
Has it been hit hard in the front?
If the frame is low up front it will make your door gap wide at the top and close at the bottom. Loosen the core support bolt and see if it takes some stress off the fender.
But if your bushings are worn out bad in the hinges your door will sag and look like that.
 

90chevywly

Newbie
Joined
Jul 8, 2021
Messages
6
Reaction score
1
Location
California
Has it been hit hard in the front?
If the frame is low up front it will make your door gap wide at the top and close at the bottom. Loosen the core support bolt and see if it takes some stress off the fender.
But if your bushings are worn out bad in the hinges your door will sag and look like that.
I have the doors off now and I plan to replace both hinge bushings but I will try the core support thing as well thank you.
 
Top