What cam and timing chain should i use in my 95

motormischiefandfire · Oct 26, 2020

If i were to get a cam like this, how would i go about tuning the computer. Ive heard that i would have to reprogram the eeprom on the board or i could replace it with an emulated one so i could change it with my laptop. What products would you recomend. Thanks!

Sent from my moto g stylus using Tapatalk

jonericfountain · Nov 20, 2020

motormischiefandfire said:
Wow! Thanks for all the replies. I think im gonna have to go for that cloyes on rock auto. I had seen it for $80 on jegs but for 20 on rock auto im just gonna have to. Now i just gotta figure out a cam. My engine doesnt need it either i just figure while im in there i may as well put in something a bit beefier

Sent from my moto g stylus using Tapatalk

I have a Cloyes Timing Chain Kit with a comp cam and I am running on a 750 Holley Carb setup which is prob diff than yours. I can tell you that you will need a tune and wouldnt get a new cam without one. Fuel delivery and everything will be changed. Also, if you retard or advance the timing with a custom tune you can make the truck do exactly what you want and when you want.

Lastly, do you plan on running a stall converter?

Good luck and enjoy.

budviper1962 · Oct 27, 2022

This is the cam with lifters I put in my 5.7 94 but not sure if yours is a tbi flat tappet.

COMP Cams 12-388-4: Computer Controlled Hydraulic Flat Tappet Camshaft RPM Range: 1000-5000 - JEGS High Performance

*Note: Hydraulic for use in throttle body, crossfire, and carbureted 305 engine. Operating Range: 1000-5000 RPM Duration Advertised: 252-4° Int

www.jegs.com

What cam and timing chain should i use in my 95

motormischiefandfire

Newbie

jonericfountain

Newbie

budviper1962

Newbie

COMP Cams 12-388-4: Computer Controlled Hydraulic Flat Tappet Camshaft RPM Range: 1000-5000 - JEGS High Performance

Similar threads

Latest posts

Members online

Forum statistics

Share this page