turn signal switch replacement ?

MulletPappa · Jun 3, 2020

Im having Issues after replacing my turn signal switch . the turn signals only work while the hazard light butten is pressed and my hazards dont work at all . I feel like it might be a ground issue ? any wiring Gurus on here that might have some wisdom?

HawkDsl · Jun 4, 2020

Hmm.. well if you replaced it.. did it come with a complete pre-wired connector (long white one that is attached to the steering column)? if you had to pin the connector yourself, then check your connector wires. My electro book is at a job site.. maybe someone will be good enough to post a diagram.

MulletPappa · Jun 4, 2020

HawkDsl said:
Hmm.. well if you replaced it.. did it come with a complete pre-wired connector (long white one that is attached to the steering column)? if you had to pin the connector yourself, then check your connector wires. My electro book is at a job site.. maybe someone will be good enough to post a diagram.

the connecter is prewired , I also tried a couple turn signel switches and have the same problem

stutaeng · Jun 4, 2020

MulletPappa said:
Im having Issues after replacing my turn signal switch . the turn signals only work while the hazard light butten is pressed and my hazards dont work at all . I feel like it might be a ground issue ? any wiring Gurus on here that might have some wisdom?

Was it working fine before? I changed mine on late GMT-400 last year and recall just having 2 long connectors. On the late models it is a pain to change; I had drop the steering column...

Maybe you got a faulty unit? I remembered I checked my new one to make sure everything worked before assembling everything back together. In my case I had brake lights that weren't working and the multi-function switch fixed it.

MulletPappa · Jun 4, 2020

hey, thanks guys thanks for your help. I took a more thorough look with a more clear head and I discovered a faulty fuse

HotWheelsBurban · Jun 4, 2020

Good to know! Always want to check the fuses with electrical problems. But it IS possible to get a defective switch; that's why I had to replace it 3 times on my dodge. At least it was MUCH easier to do than on our trucks.

turn signal switch replacement ?

MulletPappa

Newbie

HawkDsl

I'm Awesome

MulletPappa

Newbie

stutaeng

I'm Awesome

MulletPappa

Newbie

HotWheelsBurban

Gotta have 4 doors..... Rawhide, TOTY 2023!

Similar threads

Latest posts

Members online

Forum statistics

Share this page