stalled when trying to restart starts cranking normal then acts as if timing way advanced

Schurkey · Feb 22, 2020

We're good. (Although you could put the "S" into my name.)

54vicky · Feb 22, 2020

**** whoops your right

Mikey48 · Feb 24, 2020

Check your batterie cables. Had the same problem with my 88 350. The negative cable to engine was loose and the bolt holding it was striped.

54vicky · Feb 25, 2020

this is what I meant about people not reading ****

Mikey48 said:
Check your batterie cables. Had the same problem with my 88 350. The negative cable to engine was loose and the bolt holding it was striped.

Mikey48 · Feb 25, 2020

I missed something here. Sorry 54vicky that I am not perfect.

Rory Blaney · Apr 16, 2020

I know this thread may be dead at this point, but I just bought a starter for my truck (95, 5.0 truck), and it came with a tsb from GM that said if you run into an issue similar to this, that you should replace the crank sensor and retry, because there was an issue where it would advance the timing about 50 degrees, Jack the cylinder pressure through the roof, and could break the nose of the starter or the block from the torque of the engine backfiring. Just a piece of information I have, that I thought I would share.

PlayingWithTBI · Apr 16, 2020

Rory Blaney said:
and it came with a tsb from GM that said if you run into an issue similar to this, that you should replace the crank sensor and retry,

Unfortunately the TBI engine (87 - 95) doesn't have a crank sensor...

stalled when trying to restart starts cranking normal then acts as if timing way advanced

Schurkey

Supporting Member

54vicky

OBS Enthusiast

Mikey48

Newbie

54vicky

OBS Enthusiast

Mikey48

Newbie

Rory Blaney

Newbie

PlayingWithTBI

2022 Truck of the Year

Similar threads

Latest posts

Staff online

Members online

Forum statistics

Share this page