Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Anyone and experience rebuilding the front suspension and POWER STEERING GEAR with recirculating ball system on their truck?
Looking to do it myself any advice is welcome.
Sent from my SM-G920V using Tapatalk
Alright, thanks. I wasn't sure if it was rack and pinion or notNot rack & pinion. FTFY ^^ Reference:xc_hide_links_from_guests_guests_error_hide_mediaor http://www.superchevy.com/how-to/ch...ms-101-rack-and-pinion-vs-recirculating-ball/
Several people have rebuilt their front suspension, it's a wear item. If you want to tackle it yourself and plan on wrenching on your truck for a while I would suggest getting a set of GM Factory Service Manuals, they're available off an on from ebay. They're invaluable if you're going to work on and maintain your own vehicle. Stick to AC Delco parts or Moog's Problem Solver line (they have a couple lines now, IIRC the Problem Solver line has the better warranty).
True, true. I would have to have an alignment doneWhen it comes to tie rod ends and such, I just have my mechanic do it cause it's gonna need an alignment at that point