phule
Back in a 400 again
32s. Possible 285s w/ minor triming
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
32s. Possible 285s w/ minor triming
I run 285's without trimming, sets level enough with the rear. depends on offset aswell. 285's actually look a tad small, looking for something a little bigger before SAS lift. If needed, I could snap a picture for you.
My 97 3inch ZONE BL 33"bfgs everything relocated for the liftYou must be registered for see images attachYou must be registered for see images attach
Tried the cut/weld directions included with my lift, but I found it pretty problematic welding the two together - OEM and lift kit metals seems to be slightly different, and had a hell of a time getting quality welds with it. First weld broke off while tightening the bolt on the steering linkage.Anyone who has actually done the shift link extension, and the transfer case shifter extension, can you please post some pics? I've searched through quite a few pages on here, and haven't seen it yet.