97 Tahoe with 4/6 Belltech Drop

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Beaver's Chevy

OBS Enthusiast
Joined
Apr 26, 2012
Messages
52
Reaction score
0
Location
Pottsboro, TX
Great looking Tahoe! Do you know what wheels those are and the size and offset? They look great, especially with the fat lip on the rear.
Thanks, Erin
 

LovesDunes

I'm Awesome
Joined
Nov 27, 2012
Messages
151
Reaction score
112
Location
Descanso California
Great looking Tahoe! Do you know what wheels those are and the size and offset? They look great, especially with the fat lip on the rear.
Thanks, Erin

Thanks. The wheels are Boyd Codington Smoothie 2s. The rears are 20X10 and the backspace dimension is 5 7/8". The tires are 295/45/20. I will get the dimensions on the front in the next few days when I remove them to polish them.
 

Chevy-Art

LS1 Truck Club Member
Joined
Dec 4, 2009
Messages
281
Reaction score
16
Location
San Antonio, TX area
Thanks. The wheels are Boyd Codington Smoothie 2s. The rears are 20X10 and the backspace dimension is 5 7/8". The tires are 295/45/20. I will get the dimensions on the front in the next few days when I remove them to polish them.
You know I did not even notice the wheels at all, until I read this. I was concentrating on the Tahoe and the paint job. Do you think you will ever sell them?
 

LovesDunes

I'm Awesome
Joined
Nov 27, 2012
Messages
151
Reaction score
112
Location
Descanso California
Driving down the street the other day I was sucked into a pot hole that put a slight ding in the front rim and ruined the tire. Not that the tire was in all that great of condition anyways so no loss there. The good thing is that I was able to get a slightly taller/wider tire that looks more propotionate to the rear tires. But now the front sits ever so slightly higher in the front than it did so the rake I had is gone. So now it's off to trim the coil springs to get the ride height correct.

Here is how it sits now...
You must be registered for see images


I would like to drop the front 1" - 1.5"...
You must be registered for see images
 
Top