Sac12
I'm Awesome
Probably a little early to start this, but I'm bored at work so might as well. Found this 97 after I already bought a clean S10 to bag. The OBS fullsize has always been my favorite, so I sold the S10 to a friend and bought this truck, pretty clean with V6 and 130K on the ticker.
Already pulled the AutoZone radio out and installed a new Alpine and found these 60/40 seats at Pull-A-Part for $50. They came out of an ext cab, test fit already revealed that modification will be needed to make fit.
Started ordering parts for it. I jumped on that last group buy MMW had and scored a set their jebus joint control arms. Got them powder coated charcoal grey and he is doing some personal engraving on the billet caps.(Will be shipping out this week) Also have the drop spindles, upper cups and shock relocators. Last week I ordered a set of Coy C-57's in 20x8.5 all around, still need to order tires for those.
So now I'm saving up for the parts to do the rear and thinking of the plan of action. I like the ease of the KP 6-link, but think it is a little overkill and not a big fan of seeing the rear bars showing through the wheel wells. So that leaves me Nfamus 3-link or Exstensive 2-link w/ panhard bar. I know not everyone is fan of the 2-link, but it works & gets the job done. I know friends and me can install either one of these, but still have to bring it to a shop to install the ride sensors for the E-level. So now my current shift of thinking is just to take all the parts to Nfamus and have them bag it with their rear kit and install the sensors. Enough talking, here is some motivation I got in my email on Monday!
#1
#2
#3
You must be registered for see images
You must be registered for see images
Already pulled the AutoZone radio out and installed a new Alpine and found these 60/40 seats at Pull-A-Part for $50. They came out of an ext cab, test fit already revealed that modification will be needed to make fit.
You must be registered for see images
Started ordering parts for it. I jumped on that last group buy MMW had and scored a set their jebus joint control arms. Got them powder coated charcoal grey and he is doing some personal engraving on the billet caps.(Will be shipping out this week) Also have the drop spindles, upper cups and shock relocators. Last week I ordered a set of Coy C-57's in 20x8.5 all around, still need to order tires for those.
So now I'm saving up for the parts to do the rear and thinking of the plan of action. I like the ease of the KP 6-link, but think it is a little overkill and not a big fan of seeing the rear bars showing through the wheel wells. So that leaves me Nfamus 3-link or Exstensive 2-link w/ panhard bar. I know not everyone is fan of the 2-link, but it works & gets the job done. I know friends and me can install either one of these, but still have to bring it to a shop to install the ride sensors for the E-level. So now my current shift of thinking is just to take all the parts to Nfamus and have them bag it with their rear kit and install the sensors. Enough talking, here is some motivation I got in my email on Monday!
#1
You must be registered for see images
#2
You must be registered for see images
#3
You must be registered for see images
Last edited: