Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
...I have 2 of the worst hobbies a legally blind person can have; vintage audio and mechanics.
right now I only have thing from the 90s I think but as for as things I have own and sold goes as fallows kenwood ka 6004 marantz 2225 wish I would have kept these but need the money at the time had a matching toshiba preamp and tuner an adc ss215 a crown 800 csl a kenwood km 991 I also had a heathkit set ap 1615 preamp and aa 1640 power amp had an onkyo tx 4055 tunerVintage audio eh? I too, dabble. What do you have and what are you running?
1995 7.4l so not sure it’s the same as what you’re looking for? There are two “nipples” on the front but the lower one looks to have been snapped off and I don’t see anything that looks like it would have been connected there. Now I’m curious if I’m missing something here.
Yes,you are missing something...that rubber 90° elbow connects to the lower nipple to control the fast idle diaphragm on the other side of the throttle body.The top nipple is a vent,when new it will have a small sguare piece of foam attached.Not sure if you see it but that rubber elbow is under the wire loom directly in front of that lower nipple,even if it's broken there might be enough of the nipple left to connect that elbow to....at least give it a try.1995 7.4l so not sure it’s the same as what you’re looking for? There are two “nipples” on the front but the lower one looks to have been snapped off and I don’t see anything that looks like it would have been connected there. Now I’m curious if I’m missing something here.
right now I only have thing from the 90s I think but as for as things I have own and sold goes as fallows kenwood ka 6004 marantz 2225 wish I would have kept these but need the money at the time had a matching toshiba preamp and tuner an adc ss215 a crown 800 csl a kenwood km 991 I also had a heathkit set ap 1615 preamp and aa 1640 power amp had an onkyo tx 4055 tuner
as of now I am running a proton ap 1000 preamp into an art cleanbox pro to get balanced signal to feed a crown macro-tech 2400 and I absolutely love my cerwin vega re 38s
things I want to buy another art cleanbox pro and ma2400 a kenwood kt8300 or a pioneer tx9500ii/tx9800 or maybe a tx9100 would not also mind getting a hold of a marantz 2230b or a proton d540 my aunt and uncle back home in PA got a sx1250 need a restoration and hpm100 I would like to have them
The SL-1 is a real sleeper, the best preamp I've heard so far.