Hi!
I got some issues with no spark since last friday, been poking around with my volt-meter and I found that there is no ground, or 12v for that matter to the coil. There is both 12v and ground to the ICM.
I don't know if its supposed to give me a reading on the volt-meter or not but...
No readings with key in on but engine off or while cranking.
Could it be some ground issue? If so, is it possible to cut the black/white cable and ground it somewhere?
Thanks!
I got some issues with no spark since last friday, been poking around with my volt-meter and I found that there is no ground, or 12v for that matter to the coil. There is both 12v and ground to the ICM.
I don't know if its supposed to give me a reading on the volt-meter or not but...
No readings with key in on but engine off or while cranking.
Could it be some ground issue? If so, is it possible to cut the black/white cable and ground it somewhere?
Thanks!
You must be registered for see images attach