ItsMarty
Newbie
I’m assuming the forged control arms have different size bushings? I ordered a full kit of polys for my truck, I’ll have to see how the lowers I already have fit
Last edited:
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Are the Hummer H2 bushings somehow different from (superior to?) the bushings used on other 3/4 ton fully forged lower control arms?
Or are they just a convenient vehicle to look up for the correct part? (I'm assuming H2's never had the stamped arms?)
Curious for myself here, but I think it'd be useful info to many.
You are correct now that I remember. I do recall my 91' LD K2500 LCA's had pressed in BJ's, so it must've been only the first couple years?
I found some for 1200 but comes with uppers and give 2 inches lift
You must be registered for see images attach
I found some for 1200 but comes with uppers and give 2 inches lift
You must be registered for see images attach
1. I don't know of any Polyurethane bushings for GMT400 that come with the steel sleeves for the UPPER bushings. They have the steel sleeves for the LOWER bushings, but not uppers. I had to fabricate some for my truck--the originals were too far gone to re-use.I’ve got polys for all the control arms, leafs/shackles and body mount bushings that I’ll be installing