xjsciortino
Newbie
Some pictures for reference too
You must be registered for see images attach
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Truck looks good man. Thanks for the info. Sounds like your stock height up front was +/-1" of where I'm at. I'd be curious to know what others after 4" shackle/hanger kit.Been meaning to reply and measure my truck, but have been forgetting to do it after work or before I go in (problem with working 12 hour shifts at night) my truck is sitting right around 17.25” from center of wheels all around. It’s parked on kind of an unlevel surface so I had to adjust my measurements.
Front has 3” drop coils that I got off eBay. I had to heat one side up with a torch to drop it about 3/8” to sit level with the other side. Rear I pulled the middle leaf (the one with the clips) out of my pack. It was originally a 3+1 pack. I also have my tool box full of tools, maybe 200 pounds or more, and a fiberglass tonneau cover. It suits my needs, but I probably wouldn’t recommend that setup for a daily driver
Truck looks good man. Thanks for the info. Sounds like your stock height up front was +/-1" of where I'm at. I'd be curious to know what others after 4" shackle/hanger kit.
Sent from my SM-G892A using Tapatalk
Yes, I like the 4/6 look but my shop entrance and Louisiana roads do not.Thank you. I was also foolish and didn’t measure how much of a drop I got before doing it. You can tell it’s definitely lowered from stock, but nothing too crazy. Not many lowered trucks where I live so just this minor look definitely makes it noticeable. Here’s a pic from when I bought it for reference
You must be registered for see images attach
I'm pretty partial to those wheels too.Some pictures for reference too
You must be registered for see images attach
You must be registered for see images attach