They are all easy to swap out, for the front you take the door panels off and the factory speakers are held in with a clip. The rear doors, take a trim tool and pop the speaker grills off and the speakers are held in with push pins, for the rear ones I popped the fabric covers off with my hands and I imagine the stock speakers are held in with screws. The door speakers in the burb are Skar FSX65-8's which are 20$ a piece and the front tweeters are Skar TX-T which are 35$ for the set. The rears are Skar RPX46's which are 31$ for the set but I'm going to swap them for some Pioneer 4x10's. The rear door speakers are a tight fit and are a bit difficult to get all 4 push pins in. Also get the factory harness adapters, don't know the model number but they are a lot easier than soldering everything.How much trouble is it to get into the speaker housings and change them out? The ones on my Burb are going bad, so when the radio does work, can't really have it up very loud without distortion. How much do the Skar speakers cost? I've heard good things about them. Thanks!
Last edited: