I installed the new thermostat housing with the new temp sensor tonight. As you can see, I spent some time over the weekend tapping up wires, My install is complete for the most part. I may add a light to the dash that comes on with the fans, to let me know that they are on, IDK yet. So my fans come on with the temp switch, with the AC compressor, and with the rocker switch on the dash. I left everything off, and let the new temp sensor turn the fans on, and the temp gauge stayed in the same spot as it always has. I let the truck run for a little while, and the fans went off, then after about 1 or 2 mins, they kicked back on. So I know the new temp sensor is working. I ordered the temp sensor off of e-bay. It was $25. I has 2 connectors. As my relays are wired to come on with a positive input. I wanted to have the temp sensor do the same.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach