Measured up the old block and came up with 0.0005 - 0.001 too much clearance with my hypers.
This began to take apart my engine and see what I came up with. Engine was going slowly low on coolant, and oil kept disappearing from lots of leaks and probably burned a bit.
When I opened up the engine I noticed the guy before me ( owned since '02 ) had done the intake gaskets already with fel pro gasket kit. Unfortunately it does not have the updated spider injection. So I will be doing that before it goes in. Also s still had cross hatch left. Will get a bore & hone before anyway. Checked these measurements and much more happy about it.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach