Keeper
Latest activity Postings About
-
-
1960 GMC 2 ton flatbed, $2,000 Clean title. Apparently needs electrical work and front tires to get it up and going. -
The #1 reason to lower a 4X4; The owner wants too. I returned mine back to stock height... I don't like the slammed look, and a C notch...
-
I currently have a Tinworks Fab in mine and I constantly bottom out. I would've bought a DC fab if they were out at the time i did mine...
-
Not many with lowered 4x4's on here. I had my 98' Z71 dropped 5/6 for a while, ran drop keys de-cranked all the way for 5" in the front...
-
So I'm investigating a check engine light situation on my '93 K2500 5.7L and I found this under the air filter... damn rats! I've been...
-
Excuse the mess, this is just a mock up engine. Used a 92-94 6.5 GM Turbodiesel air intake box to create a 100% sealed, true cold ram...
-
Manifolds are garbage, shorties are noticeably better. I have never seen long tubes cause a condition that would hurt an engine and I...
-
Both door handles are replaced, both doors are dynamatted, and the keyless entry works with fresh batteries! Tomorrow my crutch field...
-
Mate, that's what separates the craftsman from the pretender. It doesn't matter if it is seen or not, you do it right because it's the...
-
Keeper replied to the thread Well, that was unexpected!.If your truck could smile and say ahhhh, it would. Kinda reminds me of me, every morning.
-
Rear heater hoses maybe? I don’t know how they’re routed on a suburban/Tahoe. But I don’t see anything else on that side in my Silverado.
-
Keeper replied to the thread Interior metal door panel hardware.https://www.lmctruck.com/door-components/door-parts/cd-1988-98-door-components You're looking for parts #3 & 4 in that diagram, right...
-
Just finished my last final for spring semester yesterday. Have a month off before summer classes start so that gives me plenty off time...
-
Keeper reacted to 1998_K1500_Sub's post in the thread Interesting post on parts and machine work quality with
Like.
There's one machine shop left in Saginaw (that does heads / auto engines...) and I know the guy who owns it. Nice guy, known him for... -
Keeper reacted to Schurkey's post in the thread Interesting post on parts and machine work quality with Like.
It was let-on that the change would happen in China. In fact, it made the Free-world move Way Left, towards Communism and repression.
-
-
Loading…
-
Loading…
Latest posts
-
-
-
92 2500 6 lug 4x4 NV4500 built SBC ext cab short box long term build- Latest: Sean Buick 76
-
