xXxPARAGONxXx’s 1999 Chevrolet K2500 Crew Cab

[xXxPARAGONxXx]

You think they did? I mean GM.

Na, I think that seller did. Something is fishy.

 

[Caman96]

Na, I think that seller did. Something is fishy.

Plenty of other sellers. Does it visually look like same part?

 

[xXxPARAGONxXx]

Plenty of other sellers. Does it visually look like same part?

Yeah.

I'm going to be getting it from a dealership, either from one of the dealership sellers on eBay that I have purchased from before, or GM Parts Giant online.

 

[xXxPARAGONxXx]

Removing yoke from the front driveshaft.

You must be registered for see images attach

 

[xXxPARAGONxXx]

Instilled some grease via Zerk to see if it can facilitate removal.

You must be registered for see images attach

 

[xXxPARAGONxXx]

So little lube on those splines. Crazy.

You must be registered for see images attach

You must be registered for see images attach

 

[xXxPARAGONxXx]

New slip yoke, seal, and U-joint.

You must be registered for see images attach

 

[xXxPARAGONxXx]

Spicer 5-3147X U-joint installed in slip yoke. About to instill Molykote G-4700 grease into U-joint.

Edit: Will use a different grease for the slip joints, as recommended by GM. Which means I need to buy a separate grease gun.

You must be registered for see images attach

 

[Caman96]

Replaced my rear u-joints with Spicer.

 

[xXxPARAGONxXx]

Replaced my rear u-joints with Spicer.

Only the rears needed replacement?