-:Whippy's Mustang:-

[whiplash473]

My buddy Mike stopped by. 01 Roush.

You must be registered for see images attach

Random shot of my tinted corners.

You must be registered for see images attach

 

[whiplash473]

New walls tacked into place.

You must be registered for see images attach

Tires for the new x10.5's for the rear.

You must be registered for see images attach

Took the rods/pistons down to my old man's shop to indicate them and see if any are stretched.

You must be registered for see images attach

Finished welding one side, still need to grind down the welds and brush off the weld burn.

You must be registered for see images attach

You must be registered for see images attach

 

[whiplash473]

Begin trans rebuild.

You must be registered for see images attach

Hours later.

You must be registered for see images attach

Moved the fuse box so I had to fab up a new bracket for it.

You must be registered for see images attach

Driver's side wall almost done. I'll be making a cover for the fuse box that's hinged.

You must be registered for see images attach

 

[whiplash473]

More new parts.

Trick Flow Track Heat lower.

You must be registered for see images attach

Trick Flow .499/.510 cam.

You must be registered for see images attach

TFS (trick flow) 1.6 full float rockers

You must be registered for see images attach

TFS valve covers

You must be registered for see images attach

and TFS 6.700 pushrods

You must be registered for see images attach

 

[whiplash473]

You must be registered for see images attach

You must be registered for see images attach

More new parts.

plug wires, throwout bearing, cap/rotor

You must be registered for see images attach

BBK chrome long tubes.

You must be registered for see images attach

TFS 170cc heads 61cc combustion chamber

You must be registered for see images attach

 

[whiplash473]

Got glass filler on the pass. side wall and started sanding it down.

You must be registered for see images attach

shot of the new heads

You must be registered for see images attach

Fuse box cover fabbed up.

You must be registered for see images attach

 

[95C1500]

Love this build!

 

[whiplash473]

Gotta ton of glass to sand down

You must be registered for see images attach

Output shaft done with new bearings and sychros.

You must be registered for see images attach

Control arms were looking pathetic so I wire brushed and scuffed them and shot them with black.

You must be registered for see images attach

You must be registered for see images attach

Did the same thing with the spindles.

You must be registered for see images attach

You must be registered for see images attach

 

[whiplash473]

Glass applied to the driver side.

You must be registered for see images attach

New MOOG balljoints installed and Maximum Motorsports bumpsteer kit.

You must be registered for see images attach

 

[whiplash473]

Love this build!

You must be registered for see images attach