Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Actually the short block has been sitting on the stand since November 2014. The Yukon has been my dd since then with a junkyard vortec 5.7. Sitting next to this engine is a vortec based 383 with a set of aftermarket heads, .550+ cam and a dual quad manifold. It doesn't have a home currently.VTEC Kicked in too hard.
So, when's the carbed 383 build coming?
Actually the short block has been sitting on the stand since November 2014. The Yukon has been my dd since then with a junkyard vortec 5.7. Sitting next to this engine is a vortec based 383 with a set of aftermarket heads, .550+ cam and a dual quad manifold. It doesn't have a home currently.
im gonna eventually do that with the 305 i pulled from my 93Make a table out of that ****
im thinking something along those lines. I just need to decide the order want to mount them, I want to use all 8, so I might leave a gap in between the center cylinders on both sides. just needs a good cleaning and paint!2'X4'x3/4'' piece of glass should work nicely on that block.