I thought I would make a thread for those that are looking for performace parts for their V6 powered trucks. I've found a few websites over the last few months that sell V6 performance parts. I thought I should share the information.
http://www.aussiespeed.com/details/?page_id=61
http://www.sixbangerparts.com/chevv6performanceparts/1
http://www.speedomotive.com/p-502-43...crank-kit.aspx
http://www.brodix.com/heads/v6.html
http://www.sytyperformance.com/index...0&limitstart=0
http://www.performancedistributors.com/gmssdui.htm
http://www.msdignition.com/info.aspx?taxid=8&taxid2=118
http://www.marineandstreetmotorsport...et/?page_id=36
http://www.edelbrock.com/automotive_...ormer-v6.shtml
For you power adder guys,
http://blowerdriveservice.com/cart/ymm.php?cat=37_38
http://www.sytyperformance.com/index...=176&Itemid=73
http://www.procharger.com/index.html
If anyone else has any links, feel free to post them.
If you are wanting headers, you'll more than likely have to stick with shorties. Its all I've been able to find for GMT 400s. They make long tubes for S10s, they might work in a full size but I don't know.
SYTY sells V6 collectors.
Rare parts to look for, GM Performance Blocks that allow a much bigger bore (I can't remember what), GM Performance heads, 18 degree Brodix heads, odd fire 3.48 and 3.75 cranks, cross ram intakes, and Brodix tunnel rams. They are much more than this, but most of it is exotic, such as splayed valve heads and GM Performance blocks with crank supports.
If anyone knows where I can get a 1 piece rear main, odd fire 3.48 or 3.75 crank, I'd like to know. I've only been able to find new billet 3.75 cranks, and I don't see myself spending $3000 for a crankshaft.
http://www.aussiespeed.com/details/?page_id=61
http://www.sixbangerparts.com/chevv6performanceparts/1
http://www.speedomotive.com/p-502-43...crank-kit.aspx
http://www.brodix.com/heads/v6.html
http://www.sytyperformance.com/index...0&limitstart=0
http://www.performancedistributors.com/gmssdui.htm
http://www.msdignition.com/info.aspx?taxid=8&taxid2=118
http://www.marineandstreetmotorsport...et/?page_id=36
http://www.edelbrock.com/automotive_...ormer-v6.shtml
For you power adder guys,
http://blowerdriveservice.com/cart/ymm.php?cat=37_38
http://www.sytyperformance.com/index...=176&Itemid=73
http://www.procharger.com/index.html
If anyone else has any links, feel free to post them.
If you are wanting headers, you'll more than likely have to stick with shorties. Its all I've been able to find for GMT 400s. They make long tubes for S10s, they might work in a full size but I don't know.
SYTY sells V6 collectors.
Rare parts to look for, GM Performance Blocks that allow a much bigger bore (I can't remember what), GM Performance heads, 18 degree Brodix heads, odd fire 3.48 and 3.75 cranks, cross ram intakes, and Brodix tunnel rams. They are much more than this, but most of it is exotic, such as splayed valve heads and GM Performance blocks with crank supports.
If anyone knows where I can get a 1 piece rear main, odd fire 3.48 or 3.75 crank, I'd like to know. I've only been able to find new billet 3.75 cranks, and I don't see myself spending $3000 for a crankshaft.