thiking about lifting the suburban cheap

[big_mike]

or these?
http://www.ebay.com/itm/4-ZONE-OFFR...el:K1500+Suburban&vxp=mtr&hash=item4cf97414b7

I might be reading that wrong but it says only the front shocks are good for lift, the rears show good for 0" lift. So does that mean they are stretched with a block in the rear just like a stock shock?

I'm plannin on shocks at tax time myself. I was just gonna run the Bilstein 5100's for 2" lifted trucks. I think they run about $83 each at Summit.

 

[Problem2420]

Heres another pic of my old RCSB with the setup I mentioned above:

You must be registered for see images attach

that looks freakin awesome!haha

 

[Problem2420]

I might be reading that wrong but it says only the front shocks are good for lift, the rears show good for 0" lift. So does that mean they are stretched with a block in the rear just like a stock shock?

I'm plannin on shocks at tax time myself. I was just gonna run the Bilstein 5100's for 2" lifted trucks. I think they run about $83 each at Summit.

hmm interasting.

 

[ChrisAU]

that looks freakin awesome!haha

Haha thanks, I sure wish I could have just kept that one. I was young and dumb though, and a dealer offered me $3200 for it towards a NBS ECSB '99 Z-71.

 

[canuckz71]

1" block and crank to level or just get a body lift.

 

[EastTXYukon]

Where did ya'll get your 1" rear blocks? All I can find on Summit and JC Whitney is 1.5" I don't want the cheap aluminum crap on Ebay

 

[ChrisAU]

Where did ya'll get your 1" rear blocks? All I can find on Summit and JC Whitney is 1.5" I don't want the cheap aluminum crap on Ebay

I bought mine way back off the shelf at Autozone I think.

 

[canuckz71]

Get Zero Rates.

http://offroaddesign.com/catalog/Zero%20Rates.htm

 

[LoudnLifted88]

i just had blocks and cranked the factory keys and it made a difference i had a decent ride with a 1.5 crank and a 2 inch block then i went to 3 and lost my ride and my bars started to sag bad
stock

You must be registered for see images attach

2 inch blocks

You must be registered for see images attach

3 inch blocks and cranked to the max

You must be registered for see images attach

You must be registered for see images attach

3 inch and 285's

You must be registered for see images attach

completely stock with 285's no rubbing at all

You must be registered for see images attach

 

[Problem2420]

thinking about wanting to squezze 315/70/17 or oem hummer h2 tire size.