Okay, thought maybe this would be the best place to get feedback whenever I run into an issue getting this thing back as close to 100% as I can:
1996 ECSB Silverado
4.3l Vortec / 4L60E
Done so far:
New idler pulley
New belt tensioner pulley
New spark plugs & wires
New distributor cap & rotor
New ECT & t-stat
New fuel filter
Recharged AC
Needs done:
Alignment & new tires
Inspect transmission (was low on fluid as of July 17)
Inspect brake system
Inspect fuel pump
Replace coolant temp sensor
Align doors
Replace driver side ext. door handle
Paint
1996 ECSB Silverado
4.3l Vortec / 4L60E
Done so far:
New idler pulley
New belt tensioner pulley
New spark plugs & wires
New distributor cap & rotor
New ECT & t-stat
New fuel filter
Recharged AC
Needs done:
Alignment & new tires
Inspect transmission (was low on fluid as of July 17)
Inspect brake system
Inspect fuel pump
Replace coolant temp sensor
Align doors
Replace driver side ext. door handle
Paint
You must be registered for see images
Christine Cropped by rob 13, on Flickr