Stock 350 tbi to carb swap TAX RETURN TIME!!!!!

[CJ91C1500]

ok so 91 c1500 350 tbi converting to carb i need if so if anyone can help that would be awesom.
im keeping the stock tbi heads on for now but i cant find an intake, what did you use?

 

[98_k1500]

You can use any cast iron or aluminum intake for a non vortec small block chevy. All you have to do is slot the 4 center holes with a die grinder so the bolts can stand straight up and down instead of being angled. I have done this countless times. This also works for putting TBI on non TBI heads, but this will not work on vortecs.

 

[FastOrange]

Can i ask why? if the TBI 350 is stock, i would keep TBI, a carb swap isn't really that great, no extra power gains from the swap itself, i did it so i could run a big cam and get the power i wanted, at the time i thought it wasn't possible with TBI!

If you are super set on doing it, here is my thread, it is mostly about running a 4L60E with a carb, but has some good info for you.

http://www.gmt400.com/forum/showthread.php?1362-How-To-Ditch-EFI-and-keep-TBI-PCM-for-4L60E-Control

 

[eric.s.t]

Cool write up Josh, im going to use this for my truck!

 

[SCOTTYINWV]

If you are going carb, you might as well do a cam and some vortec heads. Otherwise kinda pointless as said before.

 

[CJ91C1500]

hey im down for doing a cam and heads as long as one of you are gonna pay for it. im doing a carb swap because i cant get it to run right with the tbi i replaced almost everything and its still not right.plus i hate electronic on car/trucks. truck is also gonna be a strip truck so this is just the start. ill also be running the 700r4 . i want a clean engine bay, the least wires the better