What’s the part number for the slam air kit your going with??
Slam Air 59202... but it did NOT fit, but I made it work.. keep reading.
This is the only pic I took. So.... I don't know what's up with my truck, but this bracket would not fit between the frame and the brake drum... so that count's it out immediately. (I really should call air lift tech and figure out why, but I made it work) In addition, the bracket for the Bags is for a Bell-tech notch, and WILL NOT bolt up to a DJM notch. So, I slid the hole unit back towards the rear bumper, flipped the bracket upside down and drilled new holes in the frame. The bottom bag bracket does not hook to the flip kit, it is just clamped to the spring. If this install looks shady, you might be right, although I've been driving it like this for weeks and all is well. In fact, with 5 psi in the bags, the truck rides much better, it was too bouncy before, and this adds stability. I haven't hauled a heavy load yet, but I can't see why there will be an issue.
For the record, my truck is a 2000 crew cab short bed, 5/7 DJM drop, with 1" lift shackles in the rear, and the air lift Slam Air 59202 WOULD NOT FIT in the correct location, there is not enough room between the brake drum and frame. What you see below is me "making it work".
You must be registered for see images attach