Side mirror mounting tape/backing

[alpinecrick]

I have to install new mirror glass to the backing plate that snaps on to the "socket" of the mirror housing on one of my cargo vans. Anybody have a recommendation of what brand and type of sticky tape similar to the factory stuff?

 

[454cid]

I did this awhile back.

If you buy a new mirror from Burco it will come with it already. I don't think i used the tape though. I think mine was originaly done with silicone, and I think I installed the new one that way.

 

[reservoir dog]

I had a local glass shop cut a mirror for a Tahoe a few years ago , he used silicone in a large circle to attach it. Fwiw he said the circular pattern forms a suction as well as the adhesive . Not sure about that but it never came off.

 

[alpinecrick]

I just double checked and the factory used some kind of foam tape to attach the mirror to the backing plate.

 

[alpinecrick]

I had a local glass shop cut a mirror for a Tahoe a few years ago , he used silicone in a large circle to attach it. Fwiw he said the circular pattern forms a suction as well as the adhesive . Not sure about that but it never came off.

I like the idea of using silicone, I wonder what kind he used.....

 

[454cid]

I like the idea of using silicone, I wonder what kind he used.....

I dont recall buying any, so I probably used some old fish tank glue. I think I put spring clamps on it while it dried.

 

[alpinecrick]

OK, you guys talked me into it, I ordered some Permatex clear silicone. I have siicone caulking tubes not sure if it's high strength enough.

 

[reservoir dog]

Once you silicone it use painters tape to hold it in place for 24hrs.