ChrisAU
War Damn Eagle
u run shackle flips?
No, tried to remove the entire spring to do the add a leafs...wasn't happening without dropping the hitch, which the forklift was using to hold the truck up.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
u run shackle flips?
I rechecked and doesn't look like theres not gunna be the same problem. but we shall seeIts not in the way...until you try to pull the bolts out. They have to come out towards the hitch, there just isn't enough room. Maybe yours will be different, but I doubt it. They almost come all the way out, but not quite.
Fun fact of the day: If you have a hitch, it will have to come off in order to get the bolts out of the stock shackle mounts for the leaf springs. The front hangers are easy. But the bolts in the back are put in before the hitch, with the bolt head on the hitch side, nut towards the outside of the truck. Ran into this last night.
^^^DING DING DING^^^I don't know what would be preventing you from just hacking the bolts in half to solve this problem.
i don't think mind came with all the bolts but i'm getting new ones. while i've got everyting off i need to go ahead and rebuild/replace what i can. i very well man just get new leafs too. already got the HD torsion bars ordered.Well my kit didn't come with new bolts, but yeah, thats a great idea for the shackle flip!
i don't think mind came with all the bolts but i'm getting new ones. while i've got everyting off i need to go ahead and rebuild/replace what i can. i very well man just get new leafs too. already got the HD torsion bars ordered.