this is one i found here somewhere
Torque - go to Settings:
Manage extra PIDs/Sensors
Add custom PID
OBD2 Mode and PID: 221301
Long Name: Cam Position Retard Offset
Short name: CMPRET
Minimum value: -100
Maximum value: 100
Scale factor: x1
Unit type: degrees
Equation: ((Signed(A)*256)+B)*0.024
OBD header to use: 6C10F1
Diagnostic start command: <blank>
Diagnostic stop command: <blank>
Overrides PID: Does not override any PID
and here is another and posting the whole thing so nobody tries to claim plagarïsm,,,,
I recently got the Torque Pro app and was able to read CMP Offset with it. It takes a little work, so I figured I would post it here(found it on another Forum). Others can add tips and tricks that help.
cmp retard add to torqe pro
To add CMP offset PID follow these steps:
Settings
Manage Extra PIDs/Sensors
Hamburger Button at Top
Add Custom PID
OBD2 Mode: "221301"
Long Name: "Cam Retard Offset" name is really whatever you want
Short Name: "CMP Offset" again whatever you want here
Minimum Value: "-100"
Maximum Value: "100"
Scale Factor: x1
Unit Type: "Degrees"
Equation: " ((signed(A)*256+b)*0.063) "
OBD Header: "6C10F1"
Does not override any PID
OK
Now you can add that readout on your display pages.
I gogled cmp info and found this site.. and lots of wortless hour long you tubs,,, that dd not watch...
I am in the mindset,, that unless its heart surgury and takes that long to explain,,, it's bull crap.
thought i had a third but dont seeit....
hope this helps all..
