No start all new power components

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

702castillo

Newbie
Joined
Aug 21, 2023
Messages
11
Reaction score
4
Location
Las Vegas
Hi so I have a 91 gmc sierra c2500 5.7l
I’ve done the starter, alternator, battery, and a new belt and I’m still having the same issue where most days it won’t start for me it doesn’t crank or anything but when it does run it stays on just fine so I don’t think it’s the ignition switch but if you guys have any suggestions I’d appreciate it I don’t wanna have too sell it !
 

Komet

I'm Awesome
Joined
Nov 12, 2022
Messages
676
Reaction score
1,725
Location
Skagit Valley, WA
A new belt and it still doesn't start! Well, one thing that would be nice to know is if you're getting +12v on the small PPL wire at the starter when it's doing the no crank thing. If you do, then the ignition switch is probably working and the problem is the starter or juice going to the starter (battery cables). If you don't, there's a problem between that ring terminal and the ignition switch.
 
Top