No cruise control

[b454rat]

Trying to figure out why the cruise doesn't work in my 98 hoe. I was told it could be the brake switch, which is a major PITA to replace, it didn't fix it. All fuses are good, everything seems to be fine other than that. Possibly unit is bad?

 

[mtl111]

Possibly the multi function switch " turn signal stalk" . The switchs for the cruise are on it and maybe not working. Something to check, good luck!

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[b454rat]

I can take it off my Yukon, it worked in that one, and since the motor is junk, it won't mind lol..

 

[Schurkey]

Every broken cruise control I've fixed recently has been a failed switch on the turn signal lever.

Doesn't mean it couldn't be something else.

https://www.gmt400.com/threads/cruise-control-multifunction-turn-signal-stalk-lever.42220/

 

[mtl111]

My issues in the past have been either the brake light switch or the multi function switch.

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[b454rat]

That right up is for an older truck, but does it apply to a 98 as well? Does the turn signal pull out the same way?

 

[mtl111]

No, you have to take the covers off the column. If I remember correctly there's a couple small Torx screws on the bottom cover.

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[b454rat]

Great. I had all or most of that **** off today replacing the brake switch and new stereo, along with the excess BS from the PO.....