new to the fourm and hope to get some help on a new project

[Bushwickbill94]

well i got some air in the thing and took it off the jack.................... the thing lays out on the stock rims and tires that are bigger than the 20s so he wil prob be able to lay on 22s in the future idk i would half ot hest fit one to be sure but i has alot of room to move up with the stock tires. so its on the the rear in the morning. im making a custom wishbone and lowers while i have acess to a tig. ill be sure ot take some pics

 

[Bushwickbill94]

i just notched where the lca mounts like cut out half an inch ill see if ive got any pics if not ill get you one tomorow cuz its hard to explain

yeah i Clarenced that and everything els possible lol

 

[DRAGGIN95]

I cut out and plated in above rear control arm's, but I have ART's, and of course tie rod notch's. The next time I do this I am going to pie cut the frame above the rear C.A. mounts and jack it up and weld the seam up, it's so much easier that way.

 

[Devs93]

Thats a sick ass Blazer you have man.

 

[Slow&Low]

I can't wait to see this thing done, maybe mine will be next.

 

[Bushwickbill94]

lol mabye.


o and i did a lil more on the truck this weekend but not much

 

[Bushwickbill94]

some more pics

 

[Bushwickbill94]

wait wrong pics lol

 

[Bushwickbill94]

here ya go

 

[Bushwickbill94]

pic are a little mixed up but you get the idea. 2x2 square bars for lowers and 1 1/2 round bar for the wishbone both are 1/4 thick