eran tomer
I'm Awesome
do new lifters need to be primed/broken in before installation apart from coating with special oil?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
so you say after zero lash to wait couple of minutes before final tightening?Going slowly from zero-lash allows the lifter to bleed down so the valve doesn't open.
I set my lifters in a bucket of oil overnight. I use a pushrod to cycle each one a couple times. If one feels a bit different, I'll pull it out of the bucket and check it.