Need Help HELP with Control Arms

[1952Chevy]

So I took my whole front suspension apart to replace everything. It's taken a lot longer than expected. In the process I got the upper control arms mixed together. I have no idea which is the right and which is the left. Can someone post pictures of their arms? Playing with it they're definitely different enough to notice.

99 K2500 suburban. So any 2500 or 3500 should be similar. Thank you so much!

 

[Caman96]

52 I believe the side that isn’t as curved goes to front. This video is worth watching too.

xc_hide_links_from_guests_guests_error_hide_media

 

[amrush2112]

Did you ever get this figured out? Had the same thing happen to me on the lowers when putting back together. I ended up staring at it all and it explained itself. Spindle only goes on one way and thankfully it worked. You can put the lowers on either side but when you get to putting the hub back on it only goes one way so it became clear where I made the mistake and was easily fixed. Lots of cussing for not making notes of which side was which though. Lol.

 

[FunZ71]

What brand control arms did you use? There are so many and I want to use good quality parts.

 

[Caman96]

Buy some Mevotechs, and swap in Mevotech TTX ball joints. Or maybe on RockAuto with these, and replace bj’s with TTX.

You must be registered for see images attach