You know me, pal.
Installed a new Remote Start kit that uses the factory key fob.
xc_hide_links_from_guests_guests_error_hide_media
My GMT800, 2003 RCLB 2500HD Build / Rebuild!
- Thread starter PolarBear
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You know me, pal.
Installed a new Remote Start kit that uses the factory key fob.
OutlawDrifter
Long Roof K2500 Driver
Definitely the bee's knees! I installed an Accessorides unit on the wife's Tacoma a couple weeks ago.
OutlawDrifter
Long Roof K2500 Driver
It just got western in here...
This truck is still used for work, daily in my business. So figured it was finally time to pull the trigger on that flatbed i've been needing.
BNielsen
I'm Awesome
If @Biggershaft96 still checked in here he'd be foaming at the mouth. He hates SRW flatbeds.
I for one am interested to see how it'll look, I'm a sucker for skirted flatbeds and I heavily considered one for the K3500. That or a service box for ***** and giggles.
I did decide to change the order to a standard non-skirted bed.
After reviewing the dimensions on the width, from fender to fender. It'd make me have to run some small wheel spacers, to flush up to the fender. (Not as much as a dually bed.).
Also saves me $1,658.05 this way.
Went with the CM MFG RD Series bed.
After reviewing the dimensions on the width, from fender to fender. It'd make me have to run some small wheel spacers, to flush up to the fender. (Not as much as a dually bed.).
Also saves me $1,658.05 this way.
Went with the CM MFG RD Series bed.
You must be registered for see images attach
I think your truck would look SICK with a service body on it!
One of these days, i'll do a GMT400 with a service body. <3
