95SUBURBANLM7
OBS Enthusiast
- Joined
- Jun 8, 2015
- Messages
- 80
- Reaction score
- 8
Well after about ten months of on an off working, Im about done with my swap. The motor's in, and now Im working on getting the A/C. I saw this thread: bit.ly/1TQuyAm and modified my TBI bracket to use the GMT400 A/C compressor. Now my question is, which route did you guys go to shorten the A/C hoses? As an example, the hose that goes from the compressor to the accumulator/drier, that one seems a bit long because it is kinking pretty bad. I would like to shorten it, but it looks like the aluminum hose on the compressor needs to be bent a bit. I have no problem bending it, but what procudures are there for this?
Another question, how did you guys route the mess of coolant hoses on the fender?
Any help would be appreciated.
Another question, how did you guys route the mess of coolant hoses on the fender?
Any help would be appreciated.